Manufacturer: Oxipack
Stationary Leak Tester SLT R&D
R&D version of the SLT for flexible MAP packs, with a 7-inch touchscreen for manual settings and access to current and previous results.
Key features
- Non-destructive vacuum decay testing to ASTM F2338
- Detects large and micro leaks in a wide range of flexible MAP packs
- Tests several packs at the same time
- 7-inch touchscreen for changing settings and viewing current and previous results
- Green/red indication plus measured leak value
- Less waste: packs are not destroyed during testing
Technical data
- Dimensions (L x W x H)
- 665 x 705 x 333 mm
- Weight
- 40 kg
- Materials
- Stainless steel, anodised aluminium, polycarbonate, rubber
- Power supply
- 100–230 V, 50/60 Hz
- Compressed air supply
- > 5.5 – < 8 bar, 8 mm connection
- Compliance and IP rating
- CE, IP20
- Measuring chamber size (L x W x H)
- 350 x 500 x 116 mm
- Leak detection method
- Vacuum decay, ASTM F2338
- Minimum detectable leakage
- > 0.9 cm³/min
- Maximum testing capacity
- 2 P/M
- Connections
- USB/Ethernet data export, 24 VDC logic (freely programmable)
- Packaging type and size
- MAP packs up to 350 x 500 x 116 mm (L x W x H)
- Suitable for
- Pouches, stick packs, sachets, flow wraps, foil packaging
Description
The SLT R&D is based on the standard SLT for flexible (MAP) packaging. Two rubber membranes create a deep vacuum in the test chamber while keeping the measuring space around the pack very small, so large and micro leaks are detected without damaging the pack.
For development work
The R&D version adds a 7-inch touchscreen that makes it easy to change settings manually and to read both instant and previous results – useful in laboratories and packaging development. Several packs or sachets can be tested at once. The buttons light green (OK) or red (not OK) and the display shows the measured leakage. Testing follows ASTM F2338.
Ask about this machine
Send us your question or the details of your project. We usually reply within one working day.
More in this range
Stationary Leak Tester SLT
Bench-top vacuum decay leak tester for flexible MAP packs: two rubber membranes, non-destructive detection of gross and micro leaks to ASTM F2338.
Oxipack
Stationary Leak Tester SLT XS
Compact vacuum decay tester for rigid products such as coffee capsules, pods, cups and trays, using a rigid test plate shaped to the product.
Oxipack
Stationary Leak Tester SLT M
Vacuum decay tester for rigid products (capsules, trays, cups, pods) with a custom rigid plate and a larger 200 x 350 x 425 mm test block.
Oxipack