Manufacturer: Oxipack

Stationary Leak Tester SLT

Name: Stationary Leak Tester SLT
Brand: Oxipack

Bench-top vacuum decay leak tester for flexible MAP packs: two rubber membranes, non-destructive detection of gross and micro leaks to ASTM F2338.

Ask about this machine See it working

Key features

Non-destructive vacuum decay method to ASTM F2338
Can be adapted to rigid and flexible packaging types
Tests several packs at the same time
Operator-independent results
Integrated vacuum pump and control system
High precision in detecting micro leaks
Adapts to different pack sizes and shapes
Fast testing, suitable for high volumes
Consistent, reliable results
Easy to operate with immediate pass/fail feedback

Technical data

Dimensions (L x W x H): 630 x 705 x 333 mm
Weight: 40 kg
Materials: Stainless steel, anodised aluminium, polycarbonate, rubber
Power supply: 100–230 V, 50/60 Hz
Compressed air supply: > 5.5 – < 8 bar, 8 mm connection
Air consumption: 150 Nl/min
Compliance and IP rating: CE, IP20
Leak detection method: Vacuum decay, ASTM F2338
Minimum detectable leakage: > 0.9 cm³/min
Maximum testing capacity: 2 P/M
Connections: USB/Ethernet data export, 24 VDC logic (freely programmable)
Packaging type and size: MAP packs up to 350 x 500 x 116 mm (L x W x H)
Options: IoT data, barcode scanner, printer, line numbers, OPC UA
Suitable for: Pouches, stick packs, sachets

The Oxipack SLT is a stationary leak tester for a wide range of flexible packs in modified atmosphere (MAP). The pack is placed between two rubber membranes; the chamber is evacuated so that a deep vacuum surrounds the pack while the measuring volume stays very small. This lets the machine find both large leaks and micro leaks without damaging the pack or its seals.

Operation

Several packs or sachets can be tested in one cycle. The result is shown immediately: the buttons light green (OK) or red (not OK), and the display gives the measured leak value so the operator can see how severe a leak is. Testing follows the non-destructive vacuum decay standard ASTM F2338, so the packs can be returned to production after a pass.

Typical applications

Pouches, stick packs and sachets with MAP filling, up to 350 x 500 x 116 mm.

See it working

Ask about this machine

Send us your question or the details of your project. We usually reply within one working day.